Digital clocks
A digital clock is the quickest way to show the time in numbers: hours and minutes, seconds if you like, in the font, color and size you pick.
A digital clock shows the time in numbers: hours and minutes, and seconds if you like. It’s the quickest way to put the time on a watch face; you pick a font, a color and a size, and that’s it.
Colors come from the element’s color button, like every other element.
A few clocks as the add button makes them, with one setting changed:
As it's addedHours and minutes in white, in the 12 or 24-hour format of the watch.
Show secondsThe seconds follow the minutes, on the interactive face only.
Use leading zeroHours before 10 get two digits: 09:41 instead of 9:41.
LCD Digital fontThe same clock in a font with segmented digits, like an old digital watch.
Adding one
Section titled “Adding one”Tap the add button above the element list and pick Digital clock. It’s added right away, with settings that work: open its settings with the settings button on its row to make it yours. There’s nothing to draw.
Settings
Section titled “Settings”Hour style
SwitchUse leading zero
Writes the hours with two digits: 09:41 instead of 9:41.Seconds
SwitchShow seconds
Shows the seconds too. The always-on face leaves them out, since it only updates once a minute.
Not available on the ambient face.
Anchor
ChoiceWhich side of the clock stays in place when the time gets wider or narrower: the Center, the Left or the Right edge. Pick the side that lines up with the rest of your design.
- Center
- Left
- Right
Below these are the position and animation cards every element has.
Want your own style?
Section titled “Want your own style?”A digital clock has a fixed layout. For a clock that looks completely your own (hours stacked over minutes, every digit in its own color), draw a dynamic element with the time tags instead.