Stroke
The stroke of a layer, the line along its outline: its color or metal, width, ends, corners and dashes, and the effects over it.
The stroke is the line along the layer’s outline, its border. An open shape like a line only has a stroke.
A stroke has the same fill styles and effects as the fill, in its own Stroke effects list, so a gold bezel can have a brushed fill inside it. Its bevel shapes the stroke alone.
Stroke settings
Section titled “Stroke settings”Stroke style
ChoiceHow the stroke is colored: none, a solid color, a gradient or Shaped polished metal, like the fill.
- None
- Solid
- Linear
- Radial
- Sweep
Material
ChoiceThe stroke’s material, as for the fill: Polished metal, or a texture (carbon, mother of pearl), which is added as a Texture effect. See the fill.
- None
- Polished
- Woven
- Printed
- Iridescent
Main color
ColorThe color the stroke’s metal is built from. See the fill.
Shape
ChoiceHow the light falls on a polished stroke. Edge puts the light ramp inside the stroke’s own width, which suits a bezel or a ring. See the fill.
- Bar
- Faceted
- Conical
- Dome
- Edge
- Pyramid
Facet split
ChoiceFor a Faceted stroke: which way the split runs. See the fill.
- Auto
- Vertical
- Horizontal
Invert light
SwitchSwaps light and shadow in the stroke’s shape. See the fill.
Shine
NumberHow strongly the stroke’s metal catches the light. See the fill.
0.00 to 1.00, steps of 0.01
Highlight width
NumberHow wide the stroke’s band of light is. See the fill.
0.05 to 0.60, steps of 0.01
Gradient angle
NumberThe direction a gradient stroke runs, in degrees, or where the light on a polished stroke comes from.
0.0 to 360.0, steps of 0.1
Can be automated.
Gradient direction
SwitchSwaps the ends of the gradient.
Opacity
NumberHow see-through the stroke is, from 0 to 1.
0.00 to 1.00, steps of 0.01
Can be automated.
Stroke width
NumberHow thick the line is. On an arc, it’s how wide the ring is.
0.50 to 500.00, steps of 0.10
Can be automated.
Stroke cap
ChoiceThe ends of a line: flat at the end point, rounded, or square past it. Round ends give hands and progress arcs a soft finish.
Stroke join
ChoiceThe corners where two lines meet: sharp, rounded, or cut off.
Dash offset
NumberShifts the dashes along the line, as a part of one dash and gap. It only shows on a dashed stroke: set the dashes with the dashes button on this page, which opens Stroke dashes. Automated, it makes the dashes travel.
-1.00 to 1.00, steps of 0.01
Effects
Section titled “Effects”The Stroke effects list takes the same effects as the fill’s, with the same settings; they lie over the stroke only. Each setting is explained with the fill’s effects.
Texture
Section titled “Texture”Material
ChoiceWhich texture: woven or printed carbon, or mother of pearl. See the fill’s.
- Woven
- Printed
- Iridescent
Main color
ColorThe texture’s base color. See the fill’s.
Secondary color
ColorA carbon’s second color. See the fill’s.
Opacity
NumberHow much the texture covers the stroke under it. See the fill’s.
0.00 to 1.00, steps of 0.01
Pattern anchor
ChoiceElement keeps the pattern in place when you resize or move the shape
What the texture is pinned to. See the fill’s.
- Shape
- Element
Pattern
Section titled “Pattern”Pattern
ChoiceThe marks drawn over the stroke. See the fill’s.
- Brushed
- Sunray
- Concentric
- Grain
- Dots
- Grid
- Scanlines
Pattern color
ColorThe color of the dots, grid or lines. See the fill’s.
Pattern anchor
ChoiceElement keeps the pattern in place when you resize or move the shape
What the pattern is pinned to. See the fill’s.
- Shape
- Element
Lighting
Section titled “Lighting”Highlight color
ColorThe spot’s color. See the fill’s.
Bevel
ChoiceA bevel on the stroke alone: Raised, Pressed or Pillow. To bevel fill and stroke as one, use the fill’s bevel with Include stroke. See the fill’s.
- Raised
- Pressed
- Pillow
Depth
NumberHow far the stroke’s light and shade bands reach in. See the fill’s.
0.0 to 40.0, steps of 0.1
Light angle
NumberWhere the light on the stroke comes from; keep it the same as the fill’s. See the fill’s.
0 to 360, steps of 1
Highlight strength
NumberHow visible the stroke’s lit band is. See the fill’s.
0.00 to 1.00, steps of 0.01
Highlight
ColorThe color of the stroke’s lit band. See the fill’s.
Shadow strength
NumberHow visible the stroke’s shaded band is. See the fill’s.
0.00 to 1.00, steps of 0.01
Shadow
ColorThe color of the stroke’s shaded band. See the fill’s.